Products / KEE ANCHOR



In the absence of collective fall protection systems, mobile man anchor systems are commonly used to make working at height much safer. Kee Anchor® - a modular dead weight anchor fall prevention system is designed for use where there are no permanent guardrails or other anchor devices, to be used with Personal Protection Equipment (PPE). The Kee Anchor® product group includes WEIGHTANKA,  ACCESSANKA and WIREANKA product options. Each of the products has been independently tested by the National Engineering Laboratory and is CE approved to meet the PPE Directive.

The system is quick and easy to handle due to its modular construction. By using individual, smaller components, our range of roof anchor devices are much easier to lift and carry to and from a point of use; a basic system weights only 250Kg, with no single item weighting more than 25Kg.



Deadweight Anchor

WEIGHTANKA is a mobile, deadweight anchor device for use on roofs up to 5 degree pitch, where the installation of collective protection or permanent anchor devices is not viable. WEIGHTANKA utilises a central pedestal (attachement point) which raises the height at which the arrest force is applied, thus reducing the distance the anchor device moves during a fall arrest event. The system conforms to Class E EN 795, BS7883 & ISO 14567.


Portable Deadweight Anchor System for Rope Access

ACCESSANKA is designed as an accessory to WEIGHTANKA to provide a portable anchor device for rope access workers, allowing them to work safely. When correctly installed, the system is extremely stable and will not migrate across the roof surface either in normal use or when arresting the fall of both a worker and rescuer up to 200Kg limit. ACCESSANKA conforms to Class B EN 795, BS 7883 & ISO 14567.


Deadweight Anchor System for Flexible Safety Lines

WIREANKA is a system of deadweight anchor devices designed to support Class `C' horizontal, flexible safety lines. It is intended for use on flat roofs, in temporary situations, or where it is preferable the penetration of the roof surface be avoided. The system conforms to Class C EN 795 & ISO 14567.

Our technical team can offer practical assistance either over the phone or by fax or if required check your designs or drawings for compliance with safety standards.

Related Product Solutions